A Polygonal Dislocation Loop in MD++

From Micro and Nano Mechanics Group
Jump to navigation Jump to search

Manual ?? for MD++
Creating a Polygonal Dislocation Loop

Keonwook Kang and Wei Cai

Jan 19 , 2009

This short summary explains how we create a polygonal dislocation loop in the atomistic simulation, using the displacement field of a triagonal dislocation loop.


Displacement Field of a Triagonal Dislocation Loop

While studying a dislocation nucleation problem by atomistic simulations, the authors needed to create a polygonal dislocation loop, which requires the knowledge of the displacement field of a polygonal dislocation loop in the infinite isotropic medium.

In elasticity, the displacement field of a polygonal dislocation loop is merely the sum of fields of triangular loops that constitute the polygon loop.[1] The coordinate-free form of analytic expression for the elastic displacement field u of a triangular loop is given as[1][2]

𝐮(𝐱)=−Ω4π𝐛−1−2ν8π(1−ν)[𝐟AB+𝐟BC+𝐟CA]+18π(1−ν)[𝐠AB+𝐠BC+𝐠CA] (1)

where

𝐟AB=(𝐛×𝐭AB)ln⁡(RBRA⋅1+λB⋅𝐭AB1+λA⋅𝐭AB) (2)

and

𝐠AB=(λA+λB)𝐛⋅(λA×λB)1+λA⋅λB. (3)

fBC and fCA have the same expression as Eqn.(2) except cyclic permutation of A, B and C, and so do gBC and gCA with Eqn.(3). RA, RB and RC are the magnitudes of RA, RB and RC, respectively. (See Fig.1.) λA, λB and λC are the unit vectors of RA, RB and RC, respectively, e.g. λA=𝐑A/RA. And tAB, tBC and tCA are the unit tangent vectors of the segments AB, BC and CA, respectively. b is the loop Burgers vector.

The solid angle Ω in Eqn.(1) is expressed as[3]

Ω=−2tan−1𝐑A⋅(𝐑B×𝐑C)RARBRC+(𝐑A⋅𝐑B)RC+(𝐑A⋅𝐑C)RB+(𝐑B⋅𝐑C)RA. (4)

The sign of Ω is reversed from the original expression to be in accordance with the convention of Barnett (1985).

By displacing all the atoms according to Eqn.(1), we can create a triangular dislocation loop in the atomistic simulation as shown in Fig.2(a).


Using Virial Stress

If Virial stress is available to compute, the task of obtaining elastic constants is relatively easy. In crystals with cubic symmetry, there are three independent elastic constants: C11, C12 and C44. C11 is the proportional constant between the stress σ11 and the strain ϵ11, and C12 is the proportional constant between the stress σ22 and the strain ϵ11. We can get C11 and C12 from one simulation by applying strain ϵ11 and monitoring two components of stress σ11 and σ22. MD++ script si_elastic.script is given below.

# -*-shell-script-*-
# Calculate Elastic Constants of Si
# setnolog
setoverwrite
dirname = ~/Codes/MD++/runs/si_elastconst
#--------------------------------------------
#Create Perfect Lattice Configuration
crystalstructure = diamond-cubic
latticeconst = 5.430953e+00 #(A) for Si
latticesize = [     1    0    0     3
                    0    1    0     3
                    0    0    1     3]
makecrystal
#-------------------------------------------------------------
#Conjugate-Gradient relaxation
conj_ftol = 1e-4 conj_itmax = 1000 conj_fevalmax = 1000
conj_fixbox = 1
eval relax eval finalcnfile = relaxed.cn writecn
#-------------------------------------------------------------
conj_fixbox = 1 #conj_monitor = 1 conj_summary = 1
input = [ 1 1 0.001 ] shiftbox relax eval
input = [ 1 1 9.99000999000999e-04 ] shiftbox relax eval
input = [ 1 1 9.98003992015968e-04 ] shiftbox relax eval
input = [ 1 1 9.97008973080758e-04 ] shiftbox relax eval
input = [ 1 1 9.96015936254980e-04 ] shiftbox relax eval
quit

You can run the script by typing

$ bin/sw gpp scripts/si elastic.script

The above script first generates a 3 × 3 × 3 perfect diamond cubic structure of Si. It then applies tensile strain in increments of 0.1% along [100] direction by the command shiftbox, and calculate the corresponding Virial stress at each strained state by the command eval. From the log file, the stress components σ11 and σ22 can be obtained and plotted as a function of the applied strain ϵ11. Fig. 1(a) plots the result from running the script with Stillinger-Weber(SW) potential. The slopes of these lines give C11= 160.6 (GPa) and C12= 80.5 (GPa).

To compute C44, which is the proportional constant between σ12 and ϵ12, we can simply insert the following lines before quit in the above script.

incnfile = relaxed.cn readcn
input = [ 1 2 0.001 ] shiftbox relax eval
input = [ 1 2 0.001 ] shiftbox relax eval
input = [ 1 2 0.001 ] shiftbox relax eval
input = [ 1 2 0.001 ] shiftbox relax eval
input = [ 1 2 0.001 ] shiftbox relax eval

These commands shear the crystal in increments of ϵ12= 0.1%. Again, from the log file, the stress component σ12 can be obtained and plotted as a function of the applied strain. The result from SW potential is plotted in Fig. 1(b), from which we obtain C44= 60.2(GPa). The values for C11 , C12 , and C44 obtained here are consistent with the original paper.

Using the potential energy

Sometimes, the simulation code does not implement the Virial stress calculation. In ab initio simulations, the Virial stress is usually not very accurate. In these cases, we can compute the elastic constants by monitoring the potential energy of the system, because the strain energy density W is defined as

W=12σijϵij=12ϵijCijklϵkl.

If the only nonzero strain is ϵ11, then the streain energy per volume becomes W=C11ϵ2/2. We can determine C11 by fitting W(ϵ11) to a parabola as shown in Fig.2(a). The elastic constnat C44 can be determined in a similar way as shown in Fig.2(b). The elastic constants obtained in this way are C11=160.5(GPa) and C44=60.2(GPa), which are almost the same as the results obtained by using Virial stress.

The elastic constant C12 is easily determined by the elastic relation

B=13(C11+2C12)

where B is the bulk modulus, which we have already calculated in the manual 03. Since the bulk modulus of silicon is 108.3 (GPa) with SW potential, the elastic constant C12 is

C12=12(3B−C11)=82.2 (GPa)


Finding shear elastic constant for a non-tilting simulation cell

In the above sections, we compute C44 by shearing the simulation cell. The simulation cell was rectangular before the shear, but becomes tilted after the shear. However, sometimes a simulation code allows to use only a rectangular simulation box and we can not tilt the box at all. In this case, how can we find the shear elastic constant C44? Notice that C11 and C12 can be always obtained with a rectangular cell, when the repeat vectors of the cell are aligned with the cubic axes of the crystal. With C11 and C12C12 known, we can determine C44 using the orthogonal transformation rule for the 4th order tensor. When the repeat vectors are not aligned with the cubic axes, we should be able to compute linear combination of C11, C12 and C44 while keeping the simulation cell rectangular. Remember that C11, C12 and C44 are components of a 4th order tensor which transforms as

Cijkl=TmiTnjTskTtlCmnst

where Tij=𝐞i⋅𝐞'j is relation between two coordinate systems {𝐞i} and {𝐞'j}.

For example, if we have one coordinate system 𝐞1 = [1 0 0], 𝐞2 = [0 1 0] and 𝐞3 = [0 0 1], and another coordinate system 𝐞'1 = [1 1 0]/ \sqrt{2}, 𝐞'2 = [−1 1 0]/ \sqrt{2} and 𝐞'3 = [0 0 1], then the matrix [T] is

[T]=(1/2−1/201/21/20001)

In particular,

C1111=Tm1Tn1Ts1Tt1Cmnst=∑i=13Ti1Ti1Ti1Ti1C11+2(T11T11T21T21+T11T11T31T31+T21T21T31T31)C12+4(T21T31T21T31+T11T31T11T31+T11T21T11T21)C44.

Suppose we create a perfect crystal such that x, y, and z axes of the simulation cell are aligned with 𝐞'1, 𝐞'2 and 𝐞'3. Then by straining the crystal along x axis, we can obtain <maht>C'_{1111}</math> = 180.4 (GPa) using the SW potential. Given C11 = 160.6, C12 = 80.5, the matlab script below gives C44 = 59.9(GPa) for silicon.

% With given C11, C12, and C1111’, find C44 in cubic materials.
% C11, C12, and C44 are the elastic constants in Cartesian
% coordinate system.
% C1111’ is the elastic constant in the new coordinate.

syms C11 C12 C44
C11n = 160.6; C12n = 80.5; C44n = 60.2;
C1111prime = 180.40;
xyz0 = [ 1 0 0; % original coordinate
         0 1 0;
         0 0 1 ];
xyz1 = [ 1 1 0; % new coordinate
        -1 1 0;
         0 0 1 ];
T = zeros(3,3);
for i=1:3
    for j=1:3
        T(i,j) = dot(xyz0(i,:),xyz1(j,:)/norm(xyz1(j,:)));
    end
end

p=1; q=1; r=1; s=1;
A = T(1,p)*T(1,q)*T(1,r)*T(1,s) + T(2,p)*T(2,q)*T(2,r)*T(2,s) + ...
                                  T(3,p)*T(3,q)*T(3,r)*T(3,s);
B = T(1,p)*T(1,q)*T(2,r)*T(2,s) + T(1,p)*T(1,q)*T(3,r)*T(3,s) + ...
                                  T(2,p)*T(2,q)*T(3,r)*T(3,s);
C = T(2,p)*T(3,q)*T(2,r)*T(3,s) + T(1,p)*T(3,q)*T(1,r)*T(3,s) + ...
                                  T(1,p)*T(2,q)*T(1,r)*T(2,s);
CC = A*C11 + 2*B*C12 + 4*C*C44;
cc = subs(CC, C11, C11n); cc = subs(cc, C12, C12n);

disp(sprintf(’C44 = %f’,double(solve(cc-C1111prime,C44))))

Tcl version of MD++ script

For those who want to reproduce my results, I upload the Tcl version of MD++ script and the matlab script.
si_elastconst.tcl

# -*-shell-script-*-
#*******************************************
# Definition of procedures
#*******************************************
proc initmd { } { 
#MD++ setnolog
 MD++ setoverwrite
 MD++ dirname = runs/si_elastconst
 MD++ NIC = 200 NNM = 200
}

proc makecrystal { } { MD++ {
#--------------------------------------------
# Create Perfect Lattice Configuration
  element0 = Si   latticeconst = 5.43095
  crystalstructure = diamond-cubic  
  makecrystal
}} 

proc relax_fixbox { } { MD++ {
# Conjugate-Gradient relaxation
conj_ftol = 1e-6 conj_itmax = 1000 conj_fevalmax = 1000
conj_fixbox = 1  relax
} }

#*******************************************
# Main program starts here
#*******************************************
if { $argc == 0 } {
 set status 0
} elseif { $argc > 0 } {
 set status [lindex $argv 0]
}
puts "status = $status"

if { $status == 0 } {
# calculate elastic constants C_{11}, C_{12} and C_{44}
  initmd 

  MD++ latticesize = \[ 1 0 0 5 0 1 0 5 0 0 1 5 \]
  makecrystal 

  MD++ saveH eval
  set vol0     [MD++_Get OMEGA]
  
  set fileID [open "C11_C12.dat" w]
  for {set i -10} {$i <= 10} {incr i} {    
    set strain [expr $i/10000.0]
    MD++ restoreH input = \[ 1 1 $strain \] changeH_keepS
    relax_fixbox
    MD++ eval
  
    set sigma11 [expr (-1)*[MD++_Get TSTRESSinMPa_xx]]
    set sigma22 [expr (-1)*[MD++_Get TSTRESSinMPa_yy]]
    set EPOT    [MD++_Get EPOT]

    puts $fileID "[format %18.14e $strain]\t \
                  [format %18.14e $sigma11]\t \
                  [format %18.14e $sigma22]\t \
                  [format %18.14e [expr $EPOT/$vol0]]"
  }
  close $fileID

  set fileID [open "C44.dat" w]
  for {set i -10} {$i <= 10} {incr i} {    
    set strain [expr $i/10000.0]
    MD++ restoreH input = \[ 1 2 $strain \] changeH_keepS
    relax_fixbox
    MD++ eval
  
    set sigma12 [expr (-1)*[MD++_Get TSTRESSinMPa_xy]]
    set EPOT    [MD++_Get EPOT]

    puts $fileID "[format %18.14e $strain]\t \
                  [format %18.14e $sigma12]\t \
                  [format %18.14e [expr $EPOT/$vol0]]"
  }
  close $fileID  
  MD++ quit
  
} elseif { $status == 1 } {
# calculate elastic constants C'_{1111} in different coordinate
  initmd 

  MD++ latticesize = \[ 1 1 0 5 -1 1 0 5 0 0 1 7 \]
  makecrystal
  MD++ saveH eval
  set vol0     [MD++_Get OMEGA]
  
  set fileID [open "C1111prime.dat" w]
  for {set i -10} {$i <= 10} {incr i} {    
    set strain [expr $i/10000.0]
    MD++ restoreH input = \[ 1 1 $strain \] changeH_keepS
    relax_fixbox
    MD++ eval
  
    set sigma1111 [expr (-1)*[MD++_Get TSTRESSinMPa_xx]]
    set EPOT    [MD++_Get EPOT]
    
    puts $fileID "[format %18.14e $strain]\t \
                  [format %18.14e $sigma1111]\t \
                  [format %18.14e [expr $EPOT/$vol0]]"
  }
  close $fileID
  MD++ quit
  
} else {

  puts "unknown status = $status"
  MD++ quit
}
% Matlab script to calculate the elastic constants C11, C12 and C44
% of DC Si
clear, clf

B = 108.3e3;         % Bulk modulus of Si (in MPa) obtained from M02
data = load('C11_C12.dat');
strain11 = data(:,1);
sigma11 = data(:,2); % stress component sigma_{11} in MPa
sigma22 = data(:,3); % stress component sigma_{22} in MPa
Wn = data(:,4);       % strain energy density in eV/A^3

data = load('C44.dat');
strain12 = data(:,1);
sigma12 = data(:,2);
Ws = data(:,3);

if(exist('C1111prime.dat','file'))
    data = load('C1111prime.dat');
    strain1111 = data(:,1);
    sigma1111 = data(:,2);
    W1111 = data(:,3);
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% plot the lattice energy vs lattice constant
% and find the equilibrium lattice constant, a_0
[P, S] = polyfit(strain11,sigma11,1);
C11 = P(1);
[P, S] = polyfit(strain11,sigma22,1);
C12 = P(1);
[P, S] = polyfit(strain11,Wn,2);
C11_e = P(1)*160.2e3*2;   
[P, S] = polyfit(strain12,sigma12,1);
C44 = P(1);
[P, S] = polyfit(strain12,Ws,2);
C44_e = P(1)*160.2e3*2; 
if(exist('C1111prime.dat','file'))
    [P, S] = polyfit(strain1111,sigma1111,1);
    C1111 = P(1);
    [P, S] = polyfit(strain1111,W1111,2);
    C1111_e = P(1)*160.2e3*2;    
end

disp(sprintf('-----------------------------------------------------'))
disp(sprintf('From Virial stress calculation,'))
disp(sprintf(['the elastic constants C11 = %10.8e, C12 = %10.8e, ',...
             'C44 = %10.8e in MPa.'],C11,C12,C44))
disp(sprintf('Then bulk modulus B = (C11 + 2*C12)/3 = %10.8e in MPa.',(C11+2*C12)/3))         
disp(sprintf('-----------------------------------------------------'))
disp(sprintf('From energy calculation,'))
disp(sprintf('the elastic constants C11 = %10.8e, C44 = %10.8ein MPa.',...
             C11_e, C44_e))
disp(sprintf('Then C12 = (3*B - C11)/2 = %10.8e in MPa', (3*B - C11_e)/2))
disp(sprintf('-----------------------------------------------------'))
if(exist('C1111prime.dat','file'))
disp(sprintf('-----------------------------------------------------'))
disp(sprintf('In e1=[1 1 0], e2=[-1 1 0] and e3=[0 0 1] coordinate, '))
disp(sprintf('the elastic constants C1111 = %10.8e (MPa) from stress calculation',C1111))
disp(sprintf('                      C1111 = %10.8e (MPa) from energy calcualtion',C1111_e))
disp(sprintf('-----------------------------------------------------'))
end

figure(1)
set(gca,'fontsize',14)
plot(strain11, sigma11, '.-',strain11, sigma22,'.-r',...
     strain12, sigma12, '.-g'), grid
xlabel('Strain','fontsize',16), 
ylabel('Stress (MPa)','fontsize',16)
legend('\epsilon_{11} vs. \sigma_{11}','\epsilon_{11} vs. \sigma_{22}',...
       '\epsilon_{12} vs. \sigma_{12}',2)

figure(2)
set(gca,'fontsize',14)
plot(strain11, Wn, '.-', strain12, Ws, '.-r'), grid
xlabel('Strain','fontsize',16), 
ylabel('Strain Energy Density, \it W \rm (eV/Angstrom^3)','fontsize',16)
legend('\epsilon_{11}','\epsilon_{12}',2)

Notes

  1. ↑ 1.0 1.1 D. M. Barnett. The displacement field of a triangular dislocation loop. Philosophical Magazine A, 51(3):383--387, 1985
  2. ↑ D. M. Barnett and R. W. Balluffi. The displacement field of a triangular dislocation loop -- a correction with commentary. Philosophical Magazine Letters, 87(12):943--944, 2007
  3. ↑ A. Van Oosterom and J. Strackee. The solid angle of a plane triangle. IEEE Transactions on Biomedical Engineering, BME-30(2):125--126, 1983