Shuffle-Glide dislocation MD and NEB

From Micro and Nano Mechanics Group
Revision as of 18:12, 12 March 2018 by Xzhang11 (talk | contribs) (Created page with "==Potential for Pure Elements== ===MEAM Potential for Si=== We use the 'Siz' potential as those used in Kang, et al "Size and Temperature Effects on Brittle and Ductile Frac...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Potential for Pure Elements

MEAM Potential for Si

We use the 'Siz' potential as those used in Kang, et al "Size and Temperature Effects on Brittle and Ductile Fracture of Silicon Nanowires", International Journal of Plasticity, 26, 1387 (2010" and "Brittle and Ductile Fracture of Semiconductor Nanowires – Molecular Dynamics Simulations", Philosophical Magazine, 87, 2169, (2007)." The main parameters in the MEAM potential is specified in the meamf file. (In MD++, this file is in the potentials/MEAMDATA folder.) The lines correspond to 'Siz' is given below.

                                      αi      βi(0)    βi(1)  βi(2)  βi(3)
elt  lat   z    ielement   atwt      alpha    b0       b1     b2    b3   
'Si4' 'dia' 4.     14     28.086     4.87     4.4     5.5    5.5   5.5   


(Ri0) Ei0   Ai   ti(0)   ti(1)        ti(2)         ti(3)     ρ0Si
 alat  esub  asub t0     t1          t2           t3     rozero  ibar
 5.431 4.63  1.  1.0    3.13        4.47          -1.8      1.60    0

Note that the nearest neighbor distance Ri0 = alat ×3/4 for the diamond cubic structure.

ρ0Si = rozero will be important only for cross-potential. And note that this is the only different from Si4 line.

ibar is a setting used in the equation of state (EOS), and will be explained later.

MEAM Potential for Ge

We use the 'Ge' potential whose parameters are originally given in M. I. Baskes, The main parameters in the MEAM potential are specified in the meamf file. (In MD++, this file is in the potentials/MEAMDATA folder.) The lines corresponding to 'Ge5' are given below. Most of these parameters correspond to Table III of Baskes PRB (1992), as shown below.

                                      αi      βi(0)    βi(1)  βi(2)  βi(3)
elt  lat   z    ielement   atwt      alpha    b0       b1     b2    b3   
'Ge' 'dia' 4.     32     72.64     4.98     4.55     5.5    5.5   5.5   


(Ri0) Ei0   Ai   ti(0)   ti(1)        ti(2)         ti(3)     ρ0Si
 alat  esub  asub t0     t1          t2           t3     rozero  ibar
 5.6575  3.85  1.  1.0    4.02      5.23          -1.6      1.35    0

Note that the nearest neighbor distance Ri0 = alat ×3/4 for the diamond cubic structure.

ρ0Si = rozero will be important only for cross-potential.