MEAM Potential for Au-Ge: Difference between revisions

From Micro and Nano Mechanics Group
Jump to navigation Jump to search
Content deleted Content added
Adrianos (talk | contribs)
Adrianos (talk | contribs)
Line 74: Line 74:
Cmin(2,2,1) = 1.0 (<math>C_{\min}(2,2,1)</math>)
Cmin(2,2,1) = 1.0 (<math>C_{\min}(2,2,1)</math>)


The values for <math>E_c ({\rm AuGe}) = 4.722</math>.
The values for <math>E_c ({\rm AuGe}) = 3.189</math>.
This value is related to delta(1,2) through
This value is related to delta(1,2) through


<math>E_c ({\rm AuGe}) = 0.5*[ E_c ({\rm Au}) + E_c({\rm Ge}) ] - {\rm delta}(1,2) = 0.5 * (3.93 + 3.85) - 0.071 = 3.819</math>.
<math>E_c ({\rm AuGe}) = 0.5*[ E_c ({\rm Au}) + E_c({\rm Ge}) ] - {\rm delta}(1,2) = 0.5 * (3.93 + 3.85) - 0.071 = 3.819</math>.


<math>\rho_0^{\rm Ge} / \rho_0^{\rm Au}</math> = 0.989 because of the <math>\rho_0^{\rm Ge}</math> and <math>\rho_0^{\rm Au}</math> values specified above. This value of <math>\rho_0^{\rm Ge} / \rho_0^{\rm Au}</math> leads to the following impurity formation energies
<math>\rho_0^{\rm Ge} / \rho_0^{\rm Au}</math> = 1.5228 because of the <math>\rho_0^{\rm Ge}</math> and <math>\rho_0^{\rm Au}</math> values specified above. This value of <math>\rho_0^{\rm Ge} / \rho_0^{\rm Au}</math> leads to the following impurity formation energies


<math>E_1 = 0.331 </math> eV Ge impurity in FCC Au (MEAM)
<math>E_1 = 0.331 </math> eV Ge impurity in FCC Au (MEAM)
<math>E_2 = 1.180 </math> eV Au impurity in DC Ge (MEAM)
<math>E_2 = 1.387 </math> eV Au impurity in DC Ge (MEAM)


These values are to be compared with VASP predictions
These values are to be compared with VASP predictions

Revision as of 02:10, 27 December 2016

MEAM Potential for Au-Ge

Adriano Santana and Wei Cai

Created Aug, 2015, Last modified Sep, 2015

This tutorial explains how to specify the parameters for the Au-Ge MEAM potential in MD++. It starts with the parameters in pure Au and pure Ge potentials, then talks about the Au-Ge cross potential.


Potential for Pure Elements

Original MEAM Potential for Au

The details for the original 'Au' potential can be found here JUST REFER TO OTHER PAGE....!

UNDER CONSTRUCTION!!!!!


MEAM Potential for Ge

We use the 'Ge5' potential whose parameters are originally given in M. I. Baskes, The main parameters in the MEAM potential are specified in the meamf file. (In MD++, this file is in the potentials/MEAMDATA folder.) The lines corresponding to 'Ge5' are given below. Most of these parameters correspond to Table III of Baskes PRB (1992), as shown below.


                                      αi       βi(0)     βi(1)   βi(2)  βi(3)
elt    lat   z    ielement  atwt     alpha    b0       b1     b2    b3      
'Ge5' 'dia'  4.     32      72.64     4.98   4.55      5.5    5.5  5.5 


(Ri0)    Ei0   Ai   ti(0)   ti(1)         ti(2)          ti(3)       ρ0Ge
 alat  esub  asub t0     t1          t2           t3     rozero  ibar
 5.6575 3.85  1.0 1.0   4.02       5.23          -1.6     0.9858   0


Note that the nearest neighbor distance Ri0 = alat ×3/4 for the diamond cubic structure.

ρ0Ge = rozero will be important only for cross-potential. In our fitting it takes the value 0.9858 instead of the original one of 1.35 in Baskes paper.

ibar is a setting used in the equation of state (EOS). ibar selects the G(gamma) function in Eq (4) and (5) of the paper by BJ Lee, PRB 68, 144112 (2003).

While the functional form is quite different, the modulus is almost not affected by the choice of ibar.

The parameters for the cross potential are specified in the AuGe2nn.meam file. The variables in Eq.(A.1) of Ryu and Cai JPCM (2010) are given in the parenthesis.

erose_form = 3
rc = 4.5
attrac(2,2) = -0.36 (γ)
repuls(2,2) = 16.0  (λ)
Cmin(2,2,2) = 1.85  (Cmin)

Note that we label the atomic species of Si as 2.

Cross Potential between Au and Ge

The parameters for the cross potential are specified in AuGe2nn.meam file. The lines relevant for the cross potential (i.e. between species 1 and 2) are shown below. They are calculated from VASP LDA/US.

Similar values are found in Table 3 of Ryu and Cai, J. Phys. Condens. Matter, 22, 055401 (2010).

re(1,2) = 2.67         (re)
delta(1,2) = 0.071      (related to Ec, see below)
lattce(1,2) = b1
alpha(1,2) = 5.4219      (α)
attrac(1,2) = 0.0      
repuls(1,2) = 0.168     (γ)
Cmin(1,1,2) = 1.9      (Cmin(1,1,2))
Cmin(1,2,1) = 0.70     (Cmin(1,2,1))
Cmin(1,2,2) = 2.0     (Cmin(1,2,2))
Cmin(2,2,1) = 1.0      (Cmin(2,2,1))

The values for Ec(AuGe)=3.189. This value is related to delta(1,2) through

Ec(AuGe)=0.5*[Ec(Au)+Ec(Ge)]−delta(1,2)=0.5*(3.93+3.85)−0.071=3.819.

ρ0Ge/ρ0Au = 1.5228 because of the ρ0Ge and ρ0Au values specified above. This value of ρ0Ge/ρ0Au leads to the following impurity formation energies

E1=0.331 eV   Ge impurity in FCC Au (MEAM)
E2=1.387 eV   Au impurity in DC  Ge (MEAM)

These values are to be compared with VASP predictions

E1=0.331 eV   Ge impurity in FCC Au (VASP/LDA/US)
E2=1.130 eV   Au impurity in DC  Ge (VASP/LDA/US)

Cmax = 2.8 is the default value.