PARADISCYL:Scale-Rule: Difference between revisions

From Micro and Nano Mechanics Group
Jump to navigation Jump to search
Content deleted Content added
Line 30: Line 30:
Let's figure out what each line means in real physical unit.
Let's figure out what each line means in real physical unit.


Non-dimensional quantity is notified with the asterisk (*). For example, the dimensionless radius is expressed as
Non-dimensional quantity will be notified with the asterisk (*). For example, the dimensionless radius is expressed as <math> R^* = R/R_c </math> and is fixed to be 1 in ParaDiS Cylinder codes, which means all the length units are scaled by the cylinder radius (''R'') since <math> R_c = R </math>. The cut-off radius '''rc''' in the script is the scaled cut-off radius (''r''<sub>c</sub>) and is .375 nm in real unit if the cylinder radius is given as 375 nm, because
<math> R^* = R/R_c </math> and is fixed to be 1, which means all the length units are scaled by the cylinder radius (''R'') since <math> R_c = R </math>. The cut-off radius '''rc''' in the script is the scaled cut-off radius (''r''<sub>c</sub>) and is .375 nm in real unit if the cylinder radius is given as 375 nm, because


{|border="0" align="center"
<math>
r_c = r_c^* \times R.
|<math> r_c = r_c^* \times R. </math>
|}
</math>

In the table below, listed are four key physical quantities which will be used to scale other physical quantity.


== Table of Scale ==
== Table of Scale ==

Revision as of 05:02, 24 October 2008

Manual 03 for ParaDiS Cylinder Codes
How Units Are Scaled

Keonwook Kang, Chris Weinberger and Wei Cai

Original date : Oct 23 , 2008

Latest update on Oct 23 , 2008



Rule of Scale

ParaDiS Cylinder program is hard-coded such that the radius of a cylinder be 1. Accordingly, the input numbers such as cut-off radius need to be scaled appropriately. In the test script concentric_loop_test.ctrl in M02 Test Run, you see

 
 burgMag = 1.0e0

 #Elastic constants 
 shearModulus = 1.0e+0
 pois = 3.050000e-01

 #Core cut-off radius
 rc = 1.0e-3

Let's figure out what each line means in real physical unit.

Non-dimensional quantity will be notified with the asterisk (*). For example, the dimensionless radius is expressed as R*=R/Rc and is fixed to be 1 in ParaDiS Cylinder codes, which means all the length units are scaled by the cylinder radius (R) since Rc=R. The cut-off radius rc in the script is the scaled cut-off radius (rc) and is .375 nm in real unit if the cylinder radius is given as 375 nm, because

rc=rc*×R.

In the table below, listed are four key physical quantities which will be used to scale other physical quantity.

Table of Scale

key physical quantities scale parameter e.x.
Shear Modulus, μ α 23e9 Pa
Burgers vector magnitude, b β 3e-10 meter
Cylinder radius, R γ .35e-6 meter
Bobility, m δ 1 /(Pa*sec)
physical quantities scale parameter e.x.
σint αβ/γ 105e6 Pa